Stand Alone Pressure Regulators Flanged Frs D082552

Formerly: 082-552

Description The DUNGS FRS 5../10 pressure regulator is a spring-loaded pressure regulator with adjustable setpoint spring. Internal sensor for regulating output pressure.

- Input pressures up to 7 PSI (500 mbar)

- High flow rate

- Sturdy, precise and sensitive regulation of regulator output pressure

- Vent limiter; approved as a vent-less regulator by some authorities having jurisdiction. (Review applicable codes for vent line requirements)

Application The DUNGS FRS 5../10 pressure regulator is recommended for industrial and commercial heating applications and is suitable for natural gas, propane, butane, air and other inert gases.

Specifications Max. Operating Pressure 7 PSI (500 mbar)

Input Pressure Range 2 to 200 in. W.C. (5 mbar to 500 mbar)

Output Pressure Range 1 to 80 in. W.C. (2.5 mbar to 200 mbar) Adjustable with different springs Ambient Temperature Rating +5 F to +160 F (-15 C to +70 C) Aluminum body; One upstream tap on each side; Refer to selection guide for technical specifics, flow and pressure drop. Refer to spring guide for correct output pressure.