10 PSI Pressure Regulator, Threaded
Description The DUNGS FRS 7../6 pressure regulator is a spring-loaded pressure regulator with adjustable setpoint spring. Internal sensor for regulating output pressure.
- Input pressures up to 10 PSI (CSA to 5 PSI)
- High flow rate
- Sturdy, precise and sensitive regulation of regulator output pressure
- Lock-up Type Regulator
- Vent limiter; approved as a vent-less regulator by some authorities having jurisdiction. (Review applicable codes for vent line requirements)
Application The DUNGS FRS 7../6 pressure regulator is recommended for industrial and commercial heating applications and is suitable for natural gas, propane, butane, air and other inert gases.
Specifications Max. Operating Pressure 10 PSI (500 mbar) CSA
Input Pressure Range 2 to 200 in. W.C. (5 mbar to 500 mbar)
Output Pressure Range 1 to 80 in. W.C. (2.5 mbar to 200 mbar); Adjustable with different springs Ambient Temperature Rating -+5 F to +150 F for up to 7 PSI for regulating behavior (+/- 10% of setpoint) -40 F to +150 F: Diaphragms are suitable for the low temperature, but there may be out of range regulating behavior CSA Certified for -40 F to +160 F for up to 5 PSI Aluminum body; Two upstream and downstream taps; one tap on top; optional external feedback connection; Refer to selection guide for technical specifics, flow and pressure drop. Refer to spring guide for correct output pressure.