SB Series Flame Monitors by Fireye. Replacement for obsolete Veriflame. Choose model, See PDF
As low as
$740.00
Only %1 left
Item Code: SB Flame Monitors
SB Series Flame Monitors
Direct Replacement for Eclipse Veriflame
Parameter | Specification | |||
---|---|---|---|---|
Supply | Series 5602/5605: 120 VAC (+10%, -15%), 50/60 Hz standard Series 5603: 240 VAC (+10%, -15%), 50/60 Hz standard Internal power consumption: 12 VA (excluding external connected loads) |
|||
Temperature Ranges | ||||
Unit | Model Number | |||
Veri-Flame | All Models | |||
90 UV Scanner | 5600-90A | |||
NEMA4 UV Scanner | 5600-91 | |||
Self-Check UV | 5602-91 | |||
Remote Display | 5602DBP | |||
Flame Failure Response | ||||
Trial for Ignition (TFI) | No Purge & Purge Models: Series 5602 and 5603: 5 or 10 seconds selectable. Series 5605: 10 or 15 seconds selectable. Modulating Model: 5 or 10 seconds selectable. |
|||
Pilot Interrupt (if selected) | ||||
Purge Time | ||||
Output ratings for 120 VAC (maximum total connected load not to exceed 15 amps)* |
||||
Output ratings for 240 VAC (maximum total connected load notto exceed 15 amps)* |
||||
Approvals | • No Purge and Purge Models: Series 5602: UL listed for the USA and Canada; FM approved Series 5603: FM approved Series 5605: UL listed; FM approved • Modulating Models: Series 5602: UL recognized for US and Canada, must be mounted in panel; FM approved Series 5603: FM approved |
|||
Shipping Weight | • 1.4 kilograms (3.1 lbs) for all models • 0.5 kilograms (1.1 lb) for Models 5602-10P & 5602-10-1P bases • 1.2 kilograms (2.7 lbs) for Model 5602-40 base |
|||
*Resistive loads have inrush currents approximately the same as steady state operation. The inductive inrush current must be less than 10 times the rating. The inrush current must not be applied more than once every 15 seconds. |